Fusabond® E100

About
DuPont™ Fusabond® E100 is an anhydride modified high density polyethylene, mainly intended for use as a component in a blend with other polymers including polyolefins and polyamides. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Uses Polymer Modifier&&

About

DuPont™ Fusabond® E100 is an anhydride modified high density polyethylene, mainly intended for use as a component in a blend with other polymers including polyolefins and polyamides. It is not intended for extrusion in its pure form in typical extrusions or coextrusions. Available in pellet form for use in conventional extrusion and coextrusion equipment designed to process polyethylene (PE) resins. Uses Polymer Modifier&&

Product Description
Supplier	DOW
Generic	HDPE
Material Status	Commercial: Active
Features	High density
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954	g/cm³	ASTM D792
Density	0.954	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	2.0	g/10min	ASTM D1238
190℃，2.16kg	2.0	g/10min	ISO 1133

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	127	℃	ASTM D1525
Vicat Softening Temp	127	℃	ISO 306
Melting peak temperature	134	℃	ASTM D3418
Melting temperature
DSC	134	℃	ISO 3146
Freezing point-
DSC	115	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	< 300	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.