| About |
|---|
| DuPont™ Fusabond® N493 is an anhydride modified ethylene copolymer. DuPont™ Fusabond® N493 can only be used in the following applications: (1) all polyamide blends and (2) blends for golf balls and (3) blends for “compatibilizing flame retardant fillers for in non-halogen flame retardant polyolefin-based wire and cable compounds”&& |
| Product Description | |
|---|---|
| Supplier | DOW |
| Generic | Ethylene copolymer |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.870 | g/cm³ | ASTM D792 |
| Density | 0.870 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.6 | g/10min | ISO 1133 |
| 190℃，2.16kg | 1.6 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting peak temperature | 50.0 | ℃ | ASTM D3418 |
| Melting temperature | |||
| DSC | 50.0 | ℃ | ISO 3146 |
| Freezing point – DSC | |||
| — | 28 | ℃ | ISO 3146 |
| — | 28 | ℃ | ASTM D3418 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Maximum Processing Temperature | < 290 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |