G-Lene I60U080

About
160U080 is UV stabilized and has excellent processability with optimum balance or mechanical properties and low degree of warpage. It is widely used in Soft Drink Crates, Vegetable Crates, Milk Crates etc.&&

Product Description
GenericHDPE
Material StatusCommercial: Active
FeaturesGood Rigidity,Weather resistance is good,Low warping,Good surface appearance,High impact resistance
AvailabilitysAsia Pacific
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Density0.960g/cm³ASTM D1505
Melt Flow Rate
190℃,2.16kg8.0g/10minASTM D1238
ESCR(Environmental Stress Cracking Resistance)
10% non-ionic detergent, F50< 48.0hrASTM D1693

MECHANICALNominal valueUnitTest method
tensile strength
yield25.0MPaASTM D638
Tensile strain
yield11%ASTM D638
Bending modulus804MPaASTM D790

IMPACTNominal valueUnitTest method
Impact strength of cantilever beam notch88J/mASTM D256

THERMALNominal valueUnitTest method
Vicat Softening Temp126ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.