| About |
|---|
| Gallonprene® GP410-6501 is a Thermoplastic Elastomer (TPE) product. It can be processed by blow molding or injection molding and is available in Africa & Middle East, Asia Pacific, or Latin America. Applications of Gallonprene® GP410-6501 include consumer goods, engineering/industrial parts and handles. Characteristics include: REACH Compliant RoHS Compliant Halogen Free High Gloss&& |
| Product Description | |
|---|---|
| Supplier | Sungallon |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | Good surface appearance,Sprayable,Halogen free |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.948 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，2.16kg | 5.0 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 23 ℃ | 65 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 5.50 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 150 to 170 | °C | |
| Barrel middle temperature | 160 to 180 | °C | |
| Barrel front temperature | 170 to 190 | °C | |
| Processing (melt) temperature | 130 to 150 | °C | |
| Mold temperature | 30 to 60 | °C | |
| Injection speed | 中等 | ||
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |