| About |
|---|
| Gallonprene® GP640-7501 is a Thermoplastic Elastomer (TPE) product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, or Latin America. Typical application: Engineering/Industrial Parts. Characteristics include: REACH Compliant RoHS Compliant Flame Retardant Halogen Free&& |
| Product Description | |
|---|---|
| Supplier | Sungallon |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | High elastic,Halogen free,Flame Characteristics |
| Availabilitys | Africa & Middle East ,Latin America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 200℃，10.0kg | 45 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 23 ℃ | 75 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 6.80 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 600 | % | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 80 | °C | |
| Drying time | 2.0 | hr | |
| Barrel rear temperature | 160 to 180 | °C | |
| Barrel middle temperature | 170 to 190 | °C | |
| Barrel front temperature | 180 to 200 | °C | |
| Processing (melt) temperature | 140 to 160 | °C | |
| Mold temperature | 30 to 60 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |