| About |
|---|
| GAPEX® RPP15EU58HB is a Polypropylene product filled with 15% glass fiber. It is available in Latin America or North America. Characteristics include: Chemically Coupled Impact Modified&& |
| Product Description | |
|---|---|
| Supplier | Ferro |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | High impact resistance,Chemical coupling |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 7.7 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| TD | 0.90 | % | ASTM D955 |
| MD | 0.60 | % | ASTM D955 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| Yield, 23 ℃ | 45.5 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 5.0 | % | ASTM D638 |
| Bending modulus | ASTM D790 | ||
| 1% secant, 23 ℃ | 2560 | MPa | ASTM D790 |
| Tangent, 23 ℃ | 2860 | MPa | ASTM D790 |
| bending strength | |||
| Yield, 23 ℃ | 68.9 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 120 | J/m | ASTM D256 |
| 23℃ | 390 | J/m | ASTM D256 |
| Drop hammer impact | 0.791 | J | ASTM D5420 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 127 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 149 | ℃ | ASTM D648 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 71 to 82 | °C | |
| Drying time | 2.0 to 4.0 | hr | |
| Barrel rear temperature | 221 to 238 | °C | |
| Barrel middle temperature | 227 to 243 | °C | |
| Barrel front temperature | 232 to 260 | °C | |
| Nozzle temperature | 232 to 260 | °C | |
| Processing (melt) temperature | 221 to 238 | °C | |
| Mold temperature | 38 to 66 | °C | |
| Injection speed | Slow-Moderate | ||
| Back pressure | 0.138 to 0.345 | MPa | |
| Cushion | 5.08 to 12.7 | mm | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |