| About |
|---|
| GATONE™ 5320GF is a Polyetheretherketone (PEEK) material filled with 20% glass fiber. It is available in Asia Pacific, Europe, or North America. Important attributes of GATONE™ 5320GF are: Chemical Resistant Heat Resistant Radiation (Gamma) Resistant Wear Resistant Typical applications include: Aerospace Engineering/Industrial Parts Electrical/Electronic Applications Plumbing/Piping/Potable Water Printing Applications&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PEEK |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Gamma radiation,Machinable,Good wear resistance,Solvent resistance,Heat Stabilized,Electric mark |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.47 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 8270 | MPa | ASTM D638 |
| tensile strength | 115 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 4.0 | % | ASTM D638 |
| Bending modulus | 6890 | MPa | ASTM D790 |
| bending strength | 200 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 50 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | 620 | J/m | ASTM D256 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |