| About |
|---|
| APPLICATIONS Polystyrene is used for extrusion and die casting of industrial products and consumer goods.&& |
| Product Description | |
|---|---|
| Generic | PS (HIPS) |
| Material Status | Commercial: Active |
| Features | High impact resistance |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 4.0 to 7.0 | g/10min | |
| water content | % | ||
| Particle size | |||
| 1.5-2 mm Granules | wt% | ||
| 2-5 mm Granules | > 98.0 | wt% | |
| 5-8 mm Granules | wt% | ||
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile strain | |||
| fracture | > 25 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | > 5.4 | kJ/m² |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Residual monomer | |||
| Styrene | wt% | ||
| memo_intro |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |