| About |
|---|
| G&E Blended PMSB is made from brominated isobutylene paramethylstyrene feedstocks selected for mooney, bromine and paramethylstyrene content to achieve a uniformly blended polymer. G&E Blended PMSB is excellent for cost reductions in applications such as innerliners, non-cured tapes, construction adhesives and caulks. G&E Blended PMSB can be used as a direct partial replacement of prime butyl and halogenated butyl rubber.&& |
| Product Description | |
|---|---|
| Generic | BIIR |
| Material Status | Commercial: Active |
| Features | Bromination |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.928 | g/cm³ | |
| Mooney viscosity | |||
| ML 1+8，125℃ | 30 to 50 | MU | |
| Volatiles | < 1.0 | wt% | |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Halogen Content | 1 to 2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |