| About |
|---|
| Grade 5501 is a regular grade, black-pigmented expandable polystyrene resin. This resin is specifically formulated for high-density, impact absorption applications such as bicycle helmet liners. Grade 5501 resin is available in an unexpanded particle size range of 0.6 – 1.2 mm, and the typical density range for molded application is 2.5 to 10 pcf.&& |
| Product Description | |
|---|---|
| Supplier | Fagerdala |
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Features | High impact resistance,Foaming performance,High density |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Bending modulus | ASTM C203 | ||
| — | 29.6 | MPa | |
| — | 20.0 | MPa | |
| bending strength | ASTM C203 | ||
| — | 1.03 | MPa | |
| — | 0.655 | MPa | |
| compressive strength | ASTM D1621 | ||
| 10% strain | 0.455 | MPa | |
| 10% strain | 0.283 | MPa | |
| 15% strain | 0.483 | MPa | |
| 15% strain | 0.303 | MPa | |
| 20% strain | 0.524 | MPa | |
| 20% strain | 0.331 | MPa | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |