| About |
|---|
| Grade 5601 is a modified, flame-retardant grade, black-pigmented expandable polystyrene resin. This resin is specifically formulated for low-density and mid-range density, impact absorption applications such automotive and packaging applications. Grade 5601 resin is available in an unexpanded particle size range of 0.6 – 1.2 mm, and the typical density range for molded application is 2.5 to 10 pcf.&& |
| Product Description | |
|---|---|
| Supplier | Fagerdala |
| Generic | PS (EPS) |
| Material Status | Commercial: Active |
| Features | High impact resistance,Foaming performance,Flame Characteristics,Low density,HB |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| Bending modulus | ASTM C203 | ||
| — | 29.6 | MPa | |
| — | 20.0 | MPa | |
| bending strength | ASTM C203 | ||
| — | 1.03 | MPa | |
| — | 0.655 | MPa | |
| compressive strength | ASTM D1621 | ||
| 10% strain | 0.455 | MPa | |
| 10% strain | 0.283 | MPa | |
| 15% strain | 0.483 | MPa | |
| 15% strain | 0.303 | MPa | |
| 20% strain | 0.524 | MPa | |
| 20% strain | 0.331 | MPa | |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | HBF | UL 94 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |