| About |
|---|
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Material Status | Commercial: Negative |
| Features | Hydrolysis stability,Good wear resistance,high wear resistance |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Rockwell hardness | |||
| 5s | 82 | 邵氏A | ASTM D-2240 |
| proportion | 1.104 | ASTM D-92 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 5500 | psi | ASTM D-412 | |
| 37.9 | MPa | ASTM D-412 | |
| elongation at break | 650 | % | ASTM D-412 |
| Tensile stress | |||
| 100% elongation | |||
| 700 | psi | ASTM D-412 | |
| 4.8 | MPa | ASTM D-412 | |
| 300% elongation | |||
| 1100 | psi | ASTM D-412 | |
| 7.6 | MPa | ASTM D-412 | |
| tear strength | |||
| Cutting tear | |||
| Mold C | 400 | lb/in | ASTM D-624 |
| Mold C | 7.1 | Kg/mm | ASTM D-624 |
| Tear in pants shape | |||
| 130 | lb/in | ASTM D-470 | |
| 2.3 | kg/mm | ASTM D-470 | |
| Taber abraser | |||
| 1000rev, H18, 1000g | 0.0008 | oz | ASTM D-3389 |
| 1000rev, H18, 1000g | 22 | mg | ASTM D-3389 |
| other | Nominal value | Unit | Test method |
|---|---|---|---|
| Tm | |||
| DSC | 266 | °F | 路博润先进材料公司 |
| DSC | 130 | °C | 路博润先进材料公司 |
| Tg | |||
| DSC | -58 | °F | 路博润先进材料公司 |
| DSC | -50 | °C | 路博润先进材料公司 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Maximum moisture content | 0.02 | % | |
| Melt Temperature | |||
| 355 | °F | ||
| 179 | ℃ | ||
| Zone 1 temperature | |||
| 330 | °F | ||
| 166 | ℃ | ||
| Zone 2 temperature | |||
| 340 | °F | ||
| 171 | ℃ | ||
| Zone 3 temperature | |||
| 350 | °F | ||
| 177 | ℃ | ||
| Zone 4 temperature | |||
| 360 | °F | ||
| 182 | ℃ | ||
| Adaptor 5 temperature | |||
| 360 | °F | ||
| 182 | ℃ | ||
| Temperature of mold head area 1 | |||
| 360 | °F | ||
| 182 | ℃ | ||
| Temperature of mold head area 2 | |||
| 360 | °F | ||
| 182 | ℃ | ||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |