| About |
|---|
| GN2450 features high strength and modulus. It is well suited for FPC sliders and IC sockets, as well as other components that require modulus and dimensional precision.&& |
| Product Description | |
|---|---|
| Supplier | Kuraray |
| Generic | PA 9T |
| Material Status | Commercial: Active |
| Features | Good Rigidity |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.73 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：1.0 mm | 0.10 | % | ASTM D995 |
| TD：1.00 mm | 0.50 | % | ASTM D995 |
| Water absorption rate | |||
| 40℃，95% RH | 0.70 | % | ASTM D570 |
| Melt Flow Rate | |||
| 320℃，2.16kg | 15.00 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 23℃ | 200 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃ | 4.1 | % | ASTM D638 |
| bending strength | |||
| 23℃ | 270 | MPa | ASTM D790 |
| Bending modulus | |||
| 23℃ | 14000 | MPa | ASTM D790 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 285 | ℃ | ASTM D648 |
| Melting temperature | 306 | ℃ | ASTM D4591 |
| Glass transition temperature | 125 | ℃ | ASTM D648 |
| Vicat Softening Temp |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | 1.0E+14 | Ω.cm | ASTM D257 |
| Insulation strength | |||
| 34 | KV/mm | ASTM D149 | |
| Dielectric constant | |||
| 10.0 GHz | 3.8 | GHz | ASTM D150 |
| Dissipation factor | |||
| 10 GHz | 0.01 | GHz | ASTM D150 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.75mm | V-0 | UL 94 | |
| 1.50mm | V-0 | UL 94 | |
| 3.00mm | V-0 | UL 94 | |
| Igniting temperature of the hot wire | |||
| 0.75 mm | 930 | ℃ | IEC 60695-2-12 |
| 1.5 mm | 930 | ℃ | IEC 60695-2-12 |
| 3 mm | 930 | ℃ | IEC 60695-2-12 |
| Relative temperature of heating wire | |||
| 0.75mm | 960 | ℃ | IEC 60695-2-13 |
| 1.50mm | 960 | ℃ | IEC 60695-2-13 |
| 3.00mm | 960 | ℃ | IEC 60695-2-13 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 110 | J/m | ASTM D256 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 96 hrs |
| 3. 750kgf |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |