| About |
|---|
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Asia Pacific,North America,Latin America,Europe,Africa & Middle East |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Specific Gravity | 1.3 | ASTM D792 | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| Yield yld | 20 | MPa | ASTM D638 |
| Tensile Elongation | |||
| Broken BRK | 340 | % | ASTM D638 |
| Shore hardness | |||
| Shore A | 88 | Shore A | ASTM D2240 |
| Shore D | 35 | Shore D | ASTM D2240 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Brittle Temperature | -18.9 | ℃ | ASTM D746 |
| Aging property | Nominal value | Unit | Test method |
|---|---|---|---|
| Elongation retention rate | |||
| 136 ℃，508 μm | 90 | % | |
| Tensile strength retention rate | |||
| 136 ℃，508 μm | 110 | % |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 1.5 mm | V-0 | UL 94 | |
| Oxygen Index | 30 | % | ASTM D2863 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion Molded | Nominal value | Unit | Test method |
| Melt Temperature | 182-188 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |