| About |
|---|
| Geon™ SF M7120 is a Rigid Polyvinyl Chloride product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ SF M7120 include decorative parts and outdoor applications. Characteristics include: High Flow Impact Resistant&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity |
| Availabilitys | Asia Pacific,Europe,Latin America,North America,Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.41 | g/cm³ | ASTM D792 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23 ℃, 3.2mm, injection molding | 640 | J/m | ASTM D256-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, unannealed, 3.2 mm | 61.1 | ℃ | ASTM D648 |
| 0.45 MPa, annealed, 3.2 mm | 67.8 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 3.2 mm | 55.6 | ℃ | ASTM D648 |
| 1.8 MPa, annealed, 3.18 mm | 63.3 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 81 | ASTM D2240 | |
| Tensile modulus | 2530 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 47.6 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 13 | % | ASTM D638 |
| Bending modulus | 2920 | MPa | ASTM D790 |
| bending strength | 80.7 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |