| About |
|---|
| Geon™ Vinyl Dry Blend E7755 is a Rigid Polyvinyl Chloride product. It can be processed by extrusion, profile extrusion, or sheet extrusion and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Dry Blend E7755 include outdoor applications, construction applications, film and sheet. Characteristics include: Flame Rated Heat Resistant Impact Resistant&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | HB,5VA,High impact resistance,Heat Stabilized,V-0 |
| Availabilitys | Asia Pacific,North America,Europe,Latin America,Africa & Middle East |
| Process Methods | Extrusion,Profile extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.49 | g/cm³ | ASTM D792 |
| PVC unit classification | 1-42434-33-0100 | ASTM D4216 | |
| PVC unit classification | 16354 | ASTM D1784 | |
| Outdoor applicability | |||
| White | f1 | UL 746C | |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| TD, 23 ℃, 3.2mm, molded | 1300 | J/m | ASTM D256-A |
| Falling impact resistance | ASTM D4226 | ||
| 23℃ | 71.2 | J/cm | ASTM D4226 |
| 23℃ | 133 | J/cm | ASTM D4226 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | ASTM D648 | ||
| 0.45 MPa, annealed | 74.8 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed, 3.2 mm | 72.8 | ℃ | ASTM D648 |
| Linear coefficient of thermal expansion | |||
| MD | 6.1E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | |||
| 1.22 mm | 4.7E+14 | ohms | ASTM D257 |
| Volume resistivity | |||
| 1.22 mm | 7.7E+15 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 0.37 mm, white | HB | UL 94 | |
| 0.75 mm, all colors | V-0 | UL 94 | |
| 2.00 mm, white | 5VA | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 84 | ASTM D2240 | |
| Tensile modulus | 2920 | MPa | ASTM D638 |
| tensile strength | |||
| yield | 43.4 | MPa | ASTM D638 |
| Bending modulus | 3010 | MPa | ASTM D790 |
| bending strength | 79.4 | MPa | ASTM D790 |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Melt Temperature | 193 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type I, 0.20 in/min |
| 3. Procedure A, C.125 Dart |
| 4. Procedure B, C.125 Dart |
| 5. conditioned @ 50 deg.C |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |