| About |
|---|
| Geon™ Vinyl Flexible 90234 is a Flexible Polyvinyl Chloride product. It can be processed by injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Applications of Geon™ Vinyl Flexible 90234 include automotive and outdoor applications.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Availabilitys | Africa & Middle East ,Europe,North America,Latin America,Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.24 | g/cm³ | ASTM D792 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Low temperature toughness | |||
| -29℃，508.0 µm | 通过 | ||
| Volatile loss | |||
| 105℃，1.91 mm | 0.35 | % | ASTM D1203B |
| Antifungal activity | 通过 | ASTM G21 | |
| Xenon aging testing machine | 通过 | SAE J1960 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 80 | ASTM D2240 | |
| tensile strength | |||
| fracture | 15.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 280 | % | ASTM D638 |
| Tear resistance | 32.5 | kN/m | ASTM D1004 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 3. Die C, 2 in/min |
| 4. 4 hr, 12 mm |
| 5. Method A |
| 6. Exterior, 2500 kJ/m², Black, dE*<3.0 |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |