| About |
|---|
| Geon HC28500 is a 85 Shore A non-phthalate flexible vinyl compound made from FDA sanctioned ingredients. HC28500 can be used for extrusion and injection molding healthcare applications.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | No BPA,No DEHP plasticizer,Excellent Processability,Good Clarity,Ethylene oxide disinfection |
| Availabilitys | Latin America,Europe,North America,Africa & Middle East ,Asia Pacific |
| Process Methods | Extrusion,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.26 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -18.9 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 85 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| fracture | 20.0 | MPa | ASTM D638 |
| 100% strain | 11.7 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 370 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |