| About |
|---|
| Geon HC 3180G is a non-phthalate, gamma-stable flexible vinyl compound made from FDA sanctioned ingredients. HC 3180G can be used for extrusion and injection molding healthcare applications. This product, with color designation as “Clear 9883”,has obtained Certification under Class VI U.S. Pharmacopea for systemic toxicity and intractaneus studies.&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | No BPA,No DEHP plasticizer,Excellent Processability,Radiation disinfection,Ethylene oxide disinfection,Gamma radiation,Good Clarity |
| Availabilitys | Africa & Middle East ,Europe,North America,Latin America,Asia Pacific |
| Process Methods | Injection Molding,Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.23 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -25.0 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 80 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| fracture | 18.6 | MPa | ASTM D638 |
| 100% strain | 7.86 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 440 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |