| About |
|---|
| Geon™ Vinyl Flexible R208AE is a Polyvinyl Chloride + NBR (PVC+NBR) product. It can be processed by extrusion or injection molding and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Consumer Goods. Characteristics include: Chemical Resistant Low Temperature Resistant Wear Resistant&& |
| Product Description | |
|---|---|
| Material Status | Commercial: Active |
| Features | Good wear resistance,Antifreeze,Good Dimensional Stability,Grease resistance |
| Availabilitys | Latin America,Europe,North America,Africa & Middle East ,Asia Pacific |
| Process Methods | Extrusion,Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.32 | g/cm³ | ASTM D792 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -23.9 | ℃ | ASTM D746 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 81 | ASTM D2240 | |
| tensile strength | |||
| fracture | 15.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 380 | % | ASTM D638 |
| Ross Twist Test | |||
| -23℃ | 50000 | ASTM D1052 |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| extrusion | Nominal value | Unit | Test method |
| Processing (melt) temperature | 193 to 204 | °C | |
| Melt Temperature | 177 to 182 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 3. Cut Growth, 500% |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |