| About |
|---|
| Geon™ Vinyl Flexible R7400B is a Flexible Polyvinyl Chloride product. It can be processed by extrusion coating and is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Typical application: Wire & Cable. Characteristics include: Flame Retardant Stabilized Sunlight Resistant&& |
| Product Description | |
|---|---|
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Flame Characteristics |
| Availabilitys | Asia Pacific,Africa & Middle East ,Europe,North America,Latin America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Change rate of ultimate elongation | |||
| 60 ℃, 168 hr, in ASTM # 2 oil | -19 | % | ASTM D543 |
| Tensile strength retention rate | |||
| 121℃，1.91 mm | 110 | % | |
| Elongation retention rate | |||
| 121℃，1.91 mm | 89 | % | |
| bending strength | |||
| 60℃，1.91 mm | 100 | % | ASTM D543 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -50.0 | ℃ | ASTM D746 |
| UL temperature rating | 105 | ℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 6.4E+11 | ohms·cm | ASTM D257 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | |||
| 1.91 mm | 24 | % | ASTM D2863 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 15 seconds | 67 | ASTM D2240 | |
| tensile strength | |||
| yield | 15.2 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 400 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| extrusion | Nominal value | Unit | Test method |
| Melt Temperature | 155 to 165 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type IV, 20 in/min |
| 3. 0.075 in |
| 4. in ASTM Oil #2, 168 hr |
| 5. 500 hr, UL Standard |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |