GERMAMID 6.6 FE 60

About
GERMAMID 6.6 FE 60 is a Polyamide 66 (Nylon 66) material. It is available in Europe.&&

Product Description
Generic	PA66
Material Status	Commercial: Active
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	2.15	g/cm³	ISO 1183
Shrinkage rate	0.50 to 0.90	%	ISO 294-4
Water absorption rate
Saturation, 23 ℃	0.60	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4000	MPa	ISO 527-2
tensile strength
yield	40.0	MPa	ISO 527-2
Tensile strain
fracture	2.5	%	ISO 527-2

THERMAL	Nominal value	Unit	Test method
Melting temperature	255	℃

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.