| About |
|---|
| GETILAN ATP/190 3AP is a crosslinkable (SIOPLAS technology) polyolefinic compound. GETILAN ATP/190 3AP is a high density antiflame chemically crosslinkable polythene with high temperature index and low HCl content. Suitable for automotive cables insulation. It is a conveniently grafted polythene able to react in presence of moisture and of catalyst. We normally suggest our catalyst type MAC/203 HS or MAC/203 HSL (less reactive). REACTION BETWEEN GRAFTING AND CATALYST: These two polythenes, separately stored, must be mixed before starting extrusion in the ratio: GRAFTING/CATALYST 96/4 Certify: SAE J1127/J1128,FIAT 7.Z8220 T3 -T3 S,ISO 6722 Class C,LV 112&& |
| Product Description | |
|---|---|
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Crosslinked,High density |
| Availabilitys | Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 190℃，21.6kg | 18 to 25 | g/10min | ASTM D1238 |
| Aging performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Heat aging | IEC 60811 | ||
| 240 hr：150℃ | No Crack | IEC 60811 | |
| 6 hr：175℃ | Pass | IEC 60811 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Operating temperature | -40 to 125 | ℃ | |
| thermosetting | IEC 60811 | ||
| 200℃ | 50 | % | IEC 60811 |
| Residual：200℃ | < 5.0 | % | IEC 60811 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Extreme oxygen index | 26 | % | ASTM D2863 |
| Halogen Content | < 12 | % | IEC 60754-1 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 59 | ASTM D2240 | |
| tensile strength | > 14.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 200 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| Extrusion | Nominal value | Unit | Test method |
| Barrel 1 zone temperature | 130 | °C | |
| Barrel 2 zone temperature | 145 | °C | |
| Barrel 3 zone temperature | 175 | °C | |
| Barrel 4 zone temperature | 185 | °C | |
| Barrel 5 zone temperature | 190 to 195 | °C | |
| Nozzle temperature | 200 to 210 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 20 N/cm² |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |