GLAMIDE® NB-5550

About
GLAMIDE® NB-5550 is a Polyamide product filled with 30% mineral. It is available in North America. Characteristics include: Flame Rated Good Aesthetics Moisture Resistant&&

Product Description
Supplier	TOYOBO
Generic	PA + Olefins
Material Status	Commercial: Active
Features	Good surface appearance,Low or no water absorption
Availabilitys	North America

Technical Data

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	240 to 290	°C
Mold temperature	50 to 120	°C
Injection pressure	50.0	MPa

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.