Glasforms™ 2000

About
Standard modulus, carbon fiber reinforced, thermoset polymer pultruded profiles (square, tube and rod)&&

Product Description
Supplier	Polyone
Generic	热固性复合材料
Material Status	Commercial: Active
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density
Curing treatment	1.60	g/cm³	ASTM D792

Supplementary information	Nominal value	Unit	Test method
Ash Content
Continuous carbon fiber	75.0	%

MECHANICAL	Nominal value	Unit	Test method
Babbitt hardness	50 to 60		ASTM D2583
Tensile modulus	165000	MPa	ASTM D638
tensile strength	2790	MPa	ASTM D638
Bending modulus	145000	MPa	ASTM D790
bending strength	1240	MPa	ASTM D790
compressive strength	1030	MPa	ASTM D695

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.