| About |
|---|
| Glastic® CBC-NBC is a Thermoset Polyester product. It is available in North America. Characteristics include: Chemical Resistant Good Dimensional Stability Heat Resistant High Strength Moisture Resistant&& |
| Product Description | |
|---|---|
| Generic | 热固性聚酯 |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Good Dimensional Stability,Low or no water absorption,Good thermal shock resistance,Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.84 | g/cm³ | ASTM D792 |
| Water absorption rate | |||
| 24hr | 0.20 | % | ASTM D570 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 800 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Linear coefficient of thermal expansion | ASTM D696 | ||
| MD | 7.1E-6 | 1/℃ | ASTM D696 |
| TD | 2.1E-5 | 1/℃ | ASTM D696 |
| Thermal conductivity coefficient | 0.29 | W/m/K | ASTM C177 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 65 | ASTM D2583 | |
| Bending modulus | 19300 | MPa | ASTM D790 |
| bending strength | |||
| yield | 310 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |