| About |
|---|
| Globalene® 8181是一种聚丙烯无规共聚物（PP无规共聚物）材料,。 该产品在北美洲或亚太地区有供货,加工方式为:injection stretch blow molding、吹塑成型或片材挤出成型。 Globalene® 8181的主要特性有: 共聚物 耐冲击 透明度 典型应用领域包括: 薄板 瓶子&& |
| Product Description | |
|---|---|
| Supplier | Lee Chang Yung |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | Good Clarity,Good Printability,Random copolymer,low-temperature impact resistance |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.896 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 1.5 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.9 | % | ASTM D955 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 43 | J/m | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | 77 | ℃ | ASTM D648 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | |||
| R-level | 84 | ASTM D785 | |
| tensile strength | |||
| yield | 29.4 | MPa | ASTM D638 |
| Tensile strain | |||
| yield | 13 | % | ASTM D638 |
| Bending modulus | 1080 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |