Globalene® PC932

About
Globalene® PC932 is a Polypropylene Homopolymer (PP Homopolymer) material. It is available in Asia Pacific or North America for fiber (spinning) extrusion, filament extrusion, or laminating. Important attributes of Globalene® PC932 are: Controlled Rheology High Flow Homopolymer Typical applications include: Fabrics/Fibers Coating Applications&&

Product Description
Supplier	Lee Chang Yung
Generic	PP homopolymerization
Material Status	Commercial: Active
Features	High liquidity,Controllable rheological,Good Tensile Strength,Homopolymer
Availabilitys	North America,Asia Pacific

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.901	g/cm³	ASTM D792
Melt Flow Rate
230℃，2.16kg	25	g/10min	ASTM D1238
Shrinkage rate
MD	1.2	%	ASTM D955

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	30	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature	100	℃	ASTM D648

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	98		ASTM D785
tensile strength
yield	33.3	MPa	ASTM D638
Tensile strain
yield	11	%	ASTM D638
Bending modulus	1290	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.