| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABRON |
| Generic | PS |
| Material Status | Commercial: Negative |
| Availabilitys | China |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 200℃，5kg | 7.2 | g/10min | ASTM D1238 |
| Density | 1.04 | g/cm³ | ISO 1183 |
| Water absorption rate | ＜0.1 | % | ISO 62 |
| Shrinkage rate | 0.4-0.6 | % | ISO 294 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| vicat softening point | |||
| 10N，50℃/h | 89 | ℃ | ASTM D1525 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile stress | |||
| Fracture, 23 ℃ | 40.2 | MPa | ASTM D638 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Izod notched impact strength | |||
| 23℃ | 25.2 | j/m | ASTM D256 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Haze | 0.7 | % | ASTM D1003 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding | Nominal value | Unit | Test method |
| Dry the material at 80 ℃ before processing | 2-3 | h | |
| Injection temperature | 180-220 | ℃ | |
| Maintain mold temperature | 30-60 | ℃ | |
| Avoid prolonged heating of hot melt resin in injection molding barrel. | |||
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |