| About |
|---|
| Gravi-Tech™ GRV-UR-045-SS-W Black is a Polyurethane product. It can be processed by injection molding and is available in North America. Applications of Gravi-Tech™ GRV-UR-045-SS-W Black include industrial applications and sporting goods. Primary characteristic: non-toxic.&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | PUR |
| Material Status | Commercial: Active |
| Features | High density,Nontoxicity |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 4.49 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD | 0.60 to 1.0 | % | ASTM D955 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| 100% strain | 8.69 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 100 | % | ASTM D412 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 3.2mm | 210 | J/m | ASTM D256 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s D | 60 | ASTM D2240 | |
| Shore D, 10 seconds | 53 | ASTM D2240 | |
| Bending modulus | 365 | MPa | ASTM D790 |
| bending strength | |||
| yield | 12.4 | MPa | ASTM D790 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.50 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |