| About |
|---|
| Gravi-Tech™ GT5200-5021 LD Natural 70 is a Polypropylene product filled with 20% glass bead. It can be processed by injection molding and is available in Europe. Applications of Gravi-Tech™ GT5200-5021 LD Natural 70 include appliances, automotive, consumer goods and industrial applications. Characteristics include: RoHS Compliant Good Stiffness&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | PP not specified |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Low density,Heat Stabilized |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.750 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，2.16kg | 6.0 | g/10min | ISO 1133 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2000 | MPa | ISO 527 |
| tensile strength | |||
| yield | 20.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| yield | 2.5 | % | ISO 527-2/5 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 15 | kJ/m² | ISO 179 |
| Impact strength of cantilever beam notch | 2.0 | kJ/m² | ISO 180/A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 70.0 | ℃ | ISO 75-2/A |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Barrel rear temperature | 175 to 185 | °C | |
| Barrel middle temperature | 180 to 190 | °C | |
| Barrel front temperature | 185 to 195 | °C | |
| Nozzle temperature | 195 to 200 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0.039 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |