| About |
|---|
| Gravi-Tech™ GT6000-5020 LD Black 70是一种聚酰胺 6 + PP（尼龙 6+PP）产品,。 它可以通过注射成型进行加工,在欧洲有供货。 Gravi-Tech™ GT6000-5020 LD Black 70的应用领域包括电气用具、工业应用、汽车行业 和 生活消费品。 特性包括: 通过 ROHS 认证 良好的刚度 耐冲击 |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | PA 6+PP |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,Low density |
| Availabilitys | Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.00 | g/cm³ | ISO 1183 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 5000 | MPa | ISO 527 |
| Tensile stress | 80.0 | MPa | ISO 527-2/5 |
| Tensile strain | |||
| fracture | 2.5 | % | ISO 527-2/5 |
| Bending modulus | 5750 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Unnotch Impact strength | 32 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | 6.0 | kJ/m² | ISO 180/A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 180 | ℃ | ISO 75-2/A |
| Process Conditions | |||
|---|---|---|---|
| Injection | Nominal value | Unit | Test method |
| drying temperature | 80 | °C | |
| Drying time | 2.0 | hr | |
| Temperature at the rear of the barrel | 215 to 225 | °C | |
| Temperature in the middle of the barrel | 220 to 230 | °C | |
| Front temperature of material barrel | 225 to 235 | °C | |
| Nozzle temperature | 230 to 240 | °C | |
| Mold temperature | 80 | °C | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |