| About |
|---|
| Fluoroelastomer 742 performs well in aggressive chemicals and where ultrapure materials are not required. Recommended for conventional wet and dry system applications, Fluoroelastomer 742 has a good field performance history in both dynamic and static applications. The mid-range durometer of this material allows the seal to conform to a wide range of hardware features.&& |
| Product Description | |
|---|---|
| Generic | 氟橡胶 |
| Material Status | Commercial: Active |
| Features | Solvent resistance |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.82 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s A | 75 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| fracture | 14.1 | MPa | |
| 50% strain | 4.14 | MPa | |
| 100% strain | 7.07 | MPa | |
| Tensile strain | |||
| fracture | 180 | % | |
| Compression deformation | |||
| 204℃，70 hr | 20 | % |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Continuous use temperature | -30.0 to 200 | ℃ | |
| Operating temperature | |||
| Excursion | -30 to 250 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 25% Deflection |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |