| About |
|---|
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA 6I/X |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability,Aromatic,Block resin,V-2 |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.15 | g/cm³ | ISO 1183 |
| Shrinkage rate | |||
| TD | 0.70 | % | ISO 294 |
| MD | 0.65 | % | ISO 294 |
| Water absorption rate | ISO 62 | ||
| Saturation, 23 ℃ | 7.0 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 2.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2800 | MPa | ISO 527 |
| tensile strength | |||
| yield | 90 | MPa | ISO 527 |
| fracture | 60 | MPa | ISO 527 |
| Tensile strain | |||
| yield | 6.0 | % | ISO 527 |
| fracture | 60 | % | ISO 527 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 135 | ℃ | ISO 75 |
| 1.8 MPa, unannealed | 125 | ℃ | ISO 75 |
| Glass transition temperature | 159 | ℃ | ISO 11357 |
| Linear coefficient of thermal expansion | ISO 11359-2 | ||
| MD | 6.0E-5 | 1/℃ | ISO 11359-2 |
| TD | 6.0E-5 | 1/℃ | ISO 11359-2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flammability level | |||
| 0.8 mm | V-2 | UL 94 |
| Process Conditions | |||
|---|---|---|---|
| Processing temperature | Nominal value | Unit | Test method |
| drying temperature | 80-100 | ℃ | |
| Drying time | 6-10 | hr | |
| Temperature of the front section of the material barrel | 260-280 | ℃ | |
| Temperature in the middle section of the barrel | 270-290 | ℃ | |
| Temperature of the rear section of the barrel | 290-300 | ℃ | |
| Nozzle temperature | 280-300 | ℃ | |
| Mold temperature | 80-120 | ℃ | |
| Melting temperature | 290-310 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |