| About |
|---|
| Grilamid® XE 4159 black 9992是一种聚酰胺612（尼龙6/12）材料,。 该产品在北美洲、欧洲或亚太地区有供货,加工方式为:注射成型。 Grilamid® XE 4159 black 9992的主要特性为:阻燃/额定火焰。 典型应用领域包括: 汽车行业 电气用具 工程/工业配件 工具 家庭应用 |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA612 |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.07 | g/cm³ | |
| Shrinkage rate | |||
| TD | 0.80 | % | |
| MD | 0.80 | % | |
| Water absorption rate | |||
| Saturation, 23 ℃ | 2.8 | % | |
| Equilibrium, 23 ℃, 50% RH | 1.3 | % | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2500 | MPa |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| -30℃ | 3.0 | kJ/m² | |
| 23℃ | 6.0 | kJ/m² | |
| Charpy Unnotch Impact strength | |||
| -30℃ | 无断裂 | ||
| 23℃ | 无断裂 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 160 | ℃ | |
| 1.8 MPa, unannealed | 75.0 | ℃ | |
| Melting temperature | 215 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 8.0E-5 | 1/℃ | |
| TD | 1.0E-4 | 1/℃ |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | — | ohms | |
| Volume resistivity | 1.0E+11 | ohms·cm | |
| Dielectric strength | 34 | kV/mm | |
| Compared to the leakage tracing index | — | V |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flammability level (0.8 mm) | HB |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| ISO Type | PA612, EH, 18-020 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |