| About |
|---|
| Grilon® BM 16 nat is a Polyamide material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blown film or cast film. Primary attribute of Grilon® BM 16 nat: High Viscosity. Typical applications include: Film Coating Applications Food Contact Applications&& |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | High Viscosity,Block resin |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 275℃，5 kg | 100 | cm³/10min | ISO 1133 |
| Water absorption rate | ISO 62 | ||
| Saturation, 23 ℃ | 10 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 3.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | — | MPa | ISO 527-2 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| Water vapor transmittance | |||
| 23℃，85% RH，50 µm | 16 | g/m²/24 hr | ISO 15106-2 |
| Oxygen transfer rate | ISO 15105-2 | ||
| 23℃，50.0 µm | 90 | cm³/m²/bar/24 hr | ISO 15105-2 |
| 23℃，50.0 µm | 70 | cm³/m²/bar/24 hr | ISO 15105-2 |
| Carbon dioxide transfer rate | ISO 15105-2 | ||
| 23℃，50.0 µm | 200 | cm³/m²/bar/24 hr | ISO 15105-2 |
| 23℃，50.0 µm | 300 | cm³/m²/bar/24 hr | ISO 15105-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 164 | ℃ | ISO 11357-3 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0% RH |
| 3. 85% RH |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |