| About |
|---|
| Grilon® BM 17 is a Polyamide material. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for blown film, cast film, extrusion, or film extrusion. Important attributes of Grilon® BM 17 are: RoHS Compliant Copolymer Food Contact Acceptable High Viscosity Typical applications include: Film Coating Applications Food Contact Applications Packaging&& |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA Not specified |
| Material Status | Commercial: Active |
| Features | High Viscosity,Food contact compliance,Copolymer,Block resin |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.09 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 275℃，5 kg | 100 | cm³/10min | ISO 1133 |
| Water absorption rate | ISO 62 | ||
| Saturation, 23 ℃ | 10 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 3.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | — | MPa | ISO 527-2 |
| friction coefficient | |||
| dynamic | 0.80 | ISO 8295 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3 | ||
| MD, yield | 25.0 | MPa | ISO 527-3 |
| TD, yield | 25.0 | MPa | ISO 527-3 |
| MD, fracture | 70.0 | MPa | ISO 527-3 |
| TD, fracture | 60.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, yield | 7.0 | % | ISO 527-3 |
| TD, yield | 6.0 | % | ISO 527-3 |
| MD, fracture | 400 | % | ISO 527-3 |
| TD, fracture | 400 | % | ISO 527-3 |
| Water vapor transmittance | |||
| 23℃，85% RH | 15 | g/m²/24 hr | DIS 15106-1/-2 |
| Oxygen transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 110 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 75 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| Carbon dioxide transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 275 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 290 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 169 | ℃ | ISO 11357-3 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 64 | ISO 2813 | |
| Haze | 19 | % | ISO 14782 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 0% RH |
| 3. 85% RH |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |