| About |
|---|
| Grilon® CR 9是一种Polyamide 6/12 Copolymer (Nylon 6/12)材料,。 该产品在亚太地区、北美洲、拉丁美洲、欧洲或非洲和中东有供货,加工方式为:吹塑薄膜、挤出、流延薄膜或薄膜挤出。 Grilon® CR 9的主要特性有: 通过 ROHS 认证 共聚物 可接触食品 良好的柔韧性 高粘度 典型应用领域包括: 电影 食品接触应用 包装&& |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA 6/12 |
| Material Status | Commercial: Active |
| Features | Good flexibility,High Viscosity,Food contact compliance,Copolymer,Block resin |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Extrusion |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.10 | g/cm³ | ISO 1183 |
| Melt Volume Rate | |||
| 275℃，5 kg | 120 | cm³/10min | ISO 1133 |
| Water absorption rate | ISO 62 | ||
| Saturation, 23 ℃ | 9.0 | % | ISO 62 |
| Equilibrium, 23 ℃, 50% RH | 2.0 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | — | MPa | ISO 527-2 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ISO 527-3 | ||
| MD, yield | 30.0 | MPa | ISO 527-3 |
| TD, yield | 30.0 | MPa | ISO 527-3 |
| MD, fracture | 80.0 | MPa | ISO 527-3 |
| TD, fracture | 75.0 | MPa | ISO 527-3 |
| Tensile strain | ISO 527-3 | ||
| MD, yield | 10 | % | ISO 527-3 |
| TD, yield | 10 | % | ISO 527-3 |
| MD, fracture | 800 | % | ISO 527-3 |
| TD, fracture | 900 | % | ISO 527-3 |
| Elmandorf tear strength | ISO 6383-2 | ||
| MD | 20 | N | ISO 6383-2 |
| TD | 20 | N | ISO 6383-2 |
| Pant tear resistance | ISO 6383-1 | ||
| MD | 65.0 | N/mm | ISO 6383-1 |
| TD | 65.0 | N/mm | ISO 6383-1 |
| Water vapor transmittance | |||
| 23℃，85% RH | 15 | g/m²/24 hr | DIS 15106-1/-2 |
| Oxygen transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 55 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 75 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| Carbon dioxide transfer rate | DIS 15105-1/-2 | ||
| 23℃ | 200 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| 23℃ | 350 | cm³/m²/bar/24 hr | DIS 15105-1/-2 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 200 | ℃ | ISO 11357-3 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Gelboflextest | 800 | holes/m² | Internal Method |
| ISO Type | PA 6/12 FT, 16-020 | ISO 1874 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |