| About |
|---|
| Grivory® GV-6 FWA nat is a Polyamide 66 + PA 6I/X (Nylon 66+Nylon 6I/X) material filled with 60% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America for extrusion or injection molding. Important attributes of Grivory® GV-6 FWA nat are: Flame Rated RoHS Compliant Food Contact Acceptable Typical applications include: Plumbing/Piping/Potable Water Food Contact Applications Consumer Goods Engineering/Industrial Parts Household Applications&& |
| Product Description | |
|---|---|
| Supplier | EMS-GRIVORY |
| Generic | PA 66+PA 6I/X |
| Material Status | Commercial: Active |
| Availabilitys | Asia Pacific,North America,Latin America,Europe,Africa & Middle East |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.69 | g/cm³ | ISO 1183 |
| Molding shrinkage | ISO 294-4 | ||
| TD | 0.30 | % | ISO 294-4 |
| MD | 0.10 | % | ISO 294-4 |
| ISO 62 | |||
| Saturation, 23 ℃ | 3.5 | % | ISO 62 |
| Balanced Equilibrium, 23 ℃, 50% RH | 1.2 | % | ISO 62 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy notched impact strength | |||
| -30℃ | 13 | kJ/m² | ISO 179/1eA |
| 23℃ | 14 | kJ/m² | ISO 179/1eA |
| -30℃ | 80 | kJ/m² | ISO 179/1eU |
| 23℃ | 80 | kJ/m² | ISO 179/1eU |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature HDT | |||
| 1.8 MPa, unannealed | 235 | ℃ | ISO 75-2/A |
| 8.0 MPa, unannealed | 175 | ℃ | ISO 75-2/C |
| — | 100 to 120 | ℃ | ISO 2578 |
| — | 220 | ℃ | Internal Method |
| Melting temperature | 260 | ℃ | ISO 11357-3 |
| Coeff. of linear thermal expansion | ISO 11359-2 | ||
| MD | 1.5E-5 | 1/℃ | ISO 11359-2 |
| TD | 9.0E-5 | 1/℃ | ISO 11359-2 |
| Thickness tested | 0.8 | mm | IEC 60695-11-10 |
| ELECTRICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | — | ohms | IEC 60093 |
| 1.0E+14 | ohms·cm | IEC 60093 | |
| Electric strength | 33 | kV/mm | IEC 60243-1 |
| Compared tracking index | — | V | IEC 60112 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame Class Rating | |||
| 0.8 mm | HB | IEC 60695-11-10, -20 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Dry | 315 | MPa | ISO 2039-1 |
| Wet Cond | 290 | MPa | ISO 2039-1 |
| Tensile Modulus | |||
| Dry | 22000 | MPa | ISO 527-2 |
| Wet Cond | 21000 | MPa | ISO 527-2 |
| Tensile Strength | |||
| Break, dry dry | 260 | MPa | ISO 527-2 |
| Break, wet cond | 240 | MPa | ISO 527-2 |
| Tensile Strain | |||
| Break | 2.0 | % | ISO 527-2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Long Term |
| 3. Short Term |
| 4. 10°C/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |