Grupo IDESA HIPS P-360-S-01

About
High Impact Styrene-Butadiene Copolymer in form of beads, that shows processability, easy molding, good elongation, impact resistance and flexibility.&&

Product Description
Generic	SBC
Material Status	Commercial: Active
Features	Excellent Processability,Good flexibility,High impact resistance,Copolymer
Availabilitys	Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
200℃，5.0kg	6.5	g/10min	ASTM D1238

MECHANICAL	Nominal value	Unit	Test method
tensile strength
fracture	17.2	MPa	ASTM D638
Tensile strain
fracture	40	%	ASTM D638

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	100	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	88.0	℃	ASTM D1525

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.