| About |
|---|
| GS Pla® GZ95T is a Biodegradable Polymers (Biodeg Polymers) material. It is available in Asia Pacific for blow molding, extrusion, or injection molding. Important attributes of GS Pla® GZ95T are: Eco-Friendly/Green Good Sealability Non-Toxic&& |
| Product Description | |
|---|---|
| Supplier | Mitsubishi |
| Generic | 生物可降解聚合物 |
| Material Status | Commercial: Active |
| Features | Good heat sealing,Renewable resources,Good Printability,Permeability,Biodegradable,Nontoxicity |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.51 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 1800 | MPa | |
| tensile strength | |||
| yield | 33.0 | MPa | |
| Tensile strain | |||
| fracture | 5.0 | % |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | 5.0 | kJ/m² |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Glass transition temperature | -32.0 | ℃ | DSC |
| Melting temperature | 110 | ℃ |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |