| About |
|---|
| 耐热 |
| Product Description | |
|---|---|
| Supplier | Kumho Petrochemical |
| Generic | ABS |
| Material Status | Commercial: Active |
| Features | Heat Resistance, Good |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| 23℃，50 mm/min | 45 | MPa | ISO 527 |
| Tensile strain | |||
| 23℃，50 mm/min | 24 | % | ISO 527 |
| bending strength | |||
| 2 mm/min，23℃ | 69 | MPa | ISO 178 |
| Bending modulus | |||
| 2 mm/min，23℃ | 2250 | MPa | ISO 178 |
| Rockwell hardness | |||
| R-level | 108 | ISO 2039-2 | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 90 | ℃ | ISO 75-2 |
| 0.45 MPa, unannealed | 102 | ℃ | ISO 75-2 |
| Vicat Softening Temp | |||
| B50 | 105 | ℃ | ISO 306 |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melt Flow Rate | |||
| 220℃，10.0kg | 12 | g/10min | ISO 1133 |
| Shrinkage rate | 0.5~0.8 | % | ISO 294-4 |
| Density | 1.04 | ISO 1183 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 3.00 mm | HB | UL 94 | |
| 2.00 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy impact strength | |||
| 23℃ | 22 | kJ/m2 | ISO 179/1eA |
| Izod notched impact strength | |||
| 23℃ | 21 | kJ/m² | ISO 180-1A |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |