| About |
|---|
| Halar® XPH-940 is a waterborne ECTFE dispersion intended as a primer for use with Halar® XPH-931 waterborne topcoat. It can be applied with a standard liquid spray gun. Halar® XPH-940 provides optimum and rapid boding and can be used to maximize adhesion consistency. Main features of Halar® XPH-940 include: Light brown color Optimum and rapid adhesion Very good thermal properties Very good chemical resistance |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | ECTFE |
| Material Status | Commercial: Active |
| Features | Corrosion Resistant,Good bond,Heat Stabilized,Agglomerability |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.12 | g/cm³ | ASTM D3275 |
| Solid content | 32.0 | wt% | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 225 | ℃ | ASTM D3275 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |