HANWHA CHNA-8380L

About
Hanwha CHNB-8380L is a high molecular weight, high density polyethylene(HDPE) insulation compound specially formulated to provide an excellent oxidative stability, physical/electrical properties. It provides superior long term aging performance especially in jelly-filled cable applications. It meets Telcordia(Bellcore) aging test requirements, as well as all major international aging test specifications for both solid and foam/skin insulation. It can be used for the full range of telephone cable insulation including air-core and jelly-filled cable.&&

About

Hanwha CHNB-8380L is a high molecular weight, high density polyethylene(HDPE) insulation compound specially formulated to provide an excellent oxidative stability, physical/electrical properties. It provides superior long term aging performance especially in jelly-filled cable applications. It meets Telcordia(Bellcore) aging test requirements, as well as all major international aging test specifications for both solid and foam/skin insulation. It can be used for the full range of telephone cable insulation including air-core and jelly-filled cable.&&

Product Description
Supplier	HANWHA
Generic	HMW-HDPE
Material Status	Commercial: Active
Features	Excellent Processability,Good Electrical Properties,High molecular weight,High density,High ESCR
Availabilitys	Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.945	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.70	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
50 ℃, 10% non-ionic surfactant, F0	> 1000	hr	ASTM D1693

Aging performance	Nominal value	Unit	Test method
Oven Aging
100℃	2.0	day
Tensile strength retention rate
2 days，100℃	> 90	%	ASTM D638
Elongation retention rate

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -76.0	℃	ASTM D746
Heat resistant stress cracking	> 96	hr	ASTM D2951
Oxygen sensing time
AI，200℃	> 200	min	ASTM D3895

Electrical performance	Nominal value	Unit	Test method
Volume resistivity	> 1.0E+16	ohms·cm	ASTM D257
Dielectric constant
1 MHz	< 2.30		ASTM D150
Dissipation factor
1 MHz	< 1.0E-4		ASTM D150

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shore D, 1 second	53		ASTM D2240
tensile strength	23.5	MPa	ASTM D638
Tensile strain
fracture	550	%	ASTM D638

Process Conditions
Extrusion	Nominal value	Unit	Test method
Melt temperature	240 to 280	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.