About |
---|
Hanwha Wire and Cable Compound CTBA-8730BK is a semiconductive compound for conductor and bonded insulation shielding of medium voltage (33kV) power cables. CTBA-8730BK has an excellent scorch stability and good surface smoothness, so it is used for the triple coextrusion head.&& |
Product Description | |
---|---|
Supplier | HANWHA |
Generic | 聚烯烃,共挤薄膜用聚烯烃 |
Material Status | Commercial: Active |
Features | Excellent Processability,Good surface appearance,Conductive,Good Electrical Properties,Crosslinked,High Heat Resistance |
Availabilitys | Asia Pacific,Europe |
Process Methods | Extrusion |
Technical Data | |||
---|---|---|---|
PHYSICAL | Nominal value | Unit | Test method |
Density | 1.14 | g/cm³ | ASTM D1505 |
The degree of cross combination | 75 | % | ASTM D2765A |
Aging performance | Nominal value | Unit | Test method |
---|---|---|---|
Oven Aging | |||
136℃ | 7.0 | day | |
Tensile strength retention rate | |||
7 days,136℃ | > 90 | % | ASTM D638 |
Elongation retention rate | |||
7 days,136℃ | > 85 | % | ASTM D638 |
THERMAL | Nominal value | Unit | Test method |
---|---|---|---|
Embrittlement temperature | < -40.0 | ℃ | ASTM D746 |
Electrical performance | Nominal value | Unit | Test method |
---|---|---|---|
Volume resistivity | ASTM D257 | ||
23℃ | < 2.0E+2 | ohms·cm | ASTM D257 |
90 ℃ | < 5.0E+2 | ohms·cm | ASTM D257 |
MECHANICAL | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 58 | ASTM D2240 | |
tensile strength | 18.6 | MPa | ASTM D638 |
Tensile strain | |||
fracture | 200 | % | ASTM D638 |
Process Conditions | |||
---|---|---|---|
Extrusion | Nominal value | Unit | Test method |
Melt temperature | 100 to 120 | °C |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |