| About |
|---|
| HANWHA EVA 1540 is manufactured by Dow autoclave high pressure process and designed for variety hot melt adhesive application. EVA 1540 is well known for its excellent adhesive property, mixing property with other raw materials and high quality assurance.&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | EVA |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good bond,Inoxidizability |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.959 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 60 | g/10min | ASTM D1238 |
| Vinyl acetate content | 40.0 | wt% | Internal Method |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | < 30.0 | ℃ | ASTM D1525 |
| Melting temperature | 57.0 | ℃ |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | 54 | ASTM D2240 | |
| tensile strength | |||
| fracture | 6.28 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | > 1000 | % | ASTM D638 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |