| About |
|---|
| Feature: Low viscosity and low deterioration. High transparency. High thermal stability Use: Medical gloves, floor/wall paper/leather top coatings&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Heat Stabilized |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Aggregation degree | |||
| DP | 1550 to 1650 | JIS K6720-2 | |
| K-Value | 75.0 | DIN 53726 | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent density | 0.25 to 0.33 | g/cm³ | ASTM D1895 |
| Volatiles | < 0.30 | % | ASTM D3030 |
| Particle size | |||
| 100Mesh，150µm Sieve Pass % | 100 | % | Internal Method |
| Brookfield viscosity | |||
| cps/6rpm | < 10000 | ASTM D1824 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |