| About |
|---|
| Feature: Low viscosity, low deterioration and no plate-out. Excellent autoclave applications, good foam cell and fast gelling Use: Casting leather, foam materials {wall paper and flooring} and erasers&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Rapid solidification poin,Low Viscosity,Foaming performance,High pressure heat resistance |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| Aggregation degree | |||
| DP | 1250 to 1350 | JIS K6720-2 | |
| K-Value | 72.0 | DIN 53726 | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent density | 0.25 to 0.33 | g/cm³ | ASTM D1895 |
| Volatiles | < 0.30 | % | ASTM D3030 |
| Particle size | |||
| 100Mesh，150µm Sieve Pass % | 100 | % | Internal Method |
| Brookfield viscosity | |||
| cps/6rpm | < 10000 | ASTM D1824 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |