| About |
|---|
| HANWHA LDPE 724 is manufactured by autoclave process and designed for variety of injection molding application such as artificial flower, lids etc. LDPE 724 is well known for its excellent processing characteristics and high quality assurance.&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Good surface appearance |
| Availabilitys | Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.915 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 45 | g/10min | ASTM D1238 |
| Shrinkage rate | |||
| MD | 1.0 to 3.0 | % | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | < -45.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 80.0 | ℃ | ASTM D1525 |
| Melting temperature | 103 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 42 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 7.85 | MPa | ASTM D638 |
| fracture | 7.85 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 300 | % | ASTM D638 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Processing (melt) temperature | 160 to 280 | °C | |
| Mold temperature | 10 to 60 | °C | |
| Injection pressure | 2.94 to 9.81 | MPa | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |