Hanwha Total PP BU510

About
Description BU510 is an impact copolymer suitable for injection molding applications. It exhibits excellent gloss and mechanical properties. BU510 is manufactured using ‘Hanwha Total PP Plus’ technology. Characteristics BU510 is specially designed for high gloss property. It shows similar gloss level with ABS. The grade has a high stiffness combined with good impact resistance. Scratch resistance and stress whitening resistance are much improved compared with general PP. Processability is excellent due to very broad molecular weight distribution. Applications Home appliance housing, V/C part, W/M part etc&&

About

Description BU510 is an impact copolymer suitable for injection molding applications. It exhibits excellent gloss and mechanical properties. BU510 is manufactured using ‘Hanwha Total PP Plus’ technology. Characteristics BU510 is specially designed for high gloss property. It shows similar gloss level with ABS. The grade has a high stiffness combined with good impact resistance. Scratch resistance and stress whitening resistance are much improved compared with general PP. Processability is excellent due to very broad molecular weight distribution. Applications Home appliance housing, V/C part, W/M part etc&&

Product Description
Supplier	HANWHA
Generic	PP copolymer
Material Status	Commercial: Negative
Features	Good Rigidity,Excellent Processability,Good surface appearance,High impact resistance,Wide molecular weight distribution,Food contact compliance,High scratch resistance,Impact copolymer,High ESCR
Availabilitys	North America,Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.910	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	10	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20℃	29	J/m	ASTM D256
23℃	88	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	130	℃	ASTM D648

optical performance	Nominal value	Unit	Test method
gloss
60°	88		ASTM D2457

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	98		ASTM D785
tensile strength
yield	39.2	MPa	ASTM D638
Tensile strain
fracture	200	%	ASTM D638
Bending modulus	1810	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.